Specimen Information
Name: Umehara and Jirsa 1982, CUS
Type: Rectangular
Comments:
Reference: Umehara, H.; and Jirsa, J.O., "Shear Strength and Deterioration of Short Reinforced Concrete Columns Under Cyclic Deformations," PMFSEL Report No. 82-3, Department of Civil Engineering, University of Texas at Austin, Austin Texas, July 1982, 256 pages.
Material Properties
Concrete Strength:34.9 (MPa)
Transverse Steel:Grade:
Yield Stress: 414 (MPa) Strength: 552 (MPa)
Longitudinal Steel:Grade:
Corner Yield Stress: 441 (MPa) Strength: 745 (MPa)
Intermediate Yield Stress: 441 (MPa) Strength: 745 (MPa)
Geometry
X-Section:Width: 230 (mm) Depth: 410 (mm)
Length: L-Inflection: 455 (mm) L-Measured: 455 (mm)
Test Configuration:Double Cantilever
Loading
Axial Load:534 (kN)
P-D:P Ram rotation increases V
L-Top:1,683
L-Bottom:0
Longitudinal Reinforcement
Diameter:19 (mm) corner bars | 19 (mm) intermediate bars
Number of Bars:10
Perpendicular to Load:Clear cover: 25 (mm) Number of intermediate bars: 0
Parallel to Load:Clear cover: 25 (mm) Number of intermediate bars: 3
Reinforcement Ratio:0.0301
Transverse Reinforcement
Type:RJ: Rectangular ties with J-hooks
Number of Shear Legs:2
Region of Close Spacing:Bar Diameter: 6 (mm) Hoop Sets: 0 Hoop Spacing: 89 (mm)
Region of Wide Spacing:Bar Diameter: 6 (mm) Hoop Sets: 0 Hoop Spacing: 0 (mm)
Reinforcement Ratio:0.003
Non-Dimensional Properties
Span-to-Depth Ratio:1.11
Axial Load Ratio:0.162
Test Results
Failure Type:Shear
Damage Observation:Concrete Crushing: 0 (mm)
Significant Concrete Spalling: 0 (mm)
Long Bar Buckling: 0 (mm)
Long Bar Fracture: 0 (mm)
Spiral Fracture: 0 (mm)
Loss of Axial Load Capacity: 0 (mm)
Resources:Force Displacement Data (data)
Record Information
Version:1 (April 8, 2003)
The Structural Performance Database is a project of the Pacific Earthquake Engineering Research Center, funded by the National Science Foundation. Contact Marc Eberhard at the University of Washington with questions or comments. Report technical problems to the server administrator. Copyright 2003.